Keep the gas shut-off accessible without having it sticking out from the finished wall
When you’re planning a gas installation, there are a lot of things to think about — the appliance, gas line, location, shut-off valve and how everything will look once the job is finished.
The shut-off valve is an important part of the installation, but it isn’t always something you want sitting out in the open.
That’s where a recessed valve box can be a useful option.
What is a recessed valve box?
A recessed valve box provides a dedicated location for a gas shut-off valve while keeping the valve inside a recessed enclosure.
Burnaby Manufacturing’s Recessed Valve Box is housed in an ABS rough-in box with a stainless steel lockable door. The valve can be connected from either the top or the back of the box, giving the installer some flexibility when planning the gas connection. A brass union is also included to make installation easier.
The result is a gas shut-off that remains accessible when it is needed, without having the valve and piping projecting out from the finished surface.
Accessible doesn’t have to mean exposed
A gas shut-off valve needs to be accessible, but that doesn’t necessarily mean it needs to be visually prominent.
Think about an outdoor kitchen, patio, commercial space or another finished area where appearance matters.
You’ve put time and money into the finished installation. The last thing you may want is a gas valve and piping sitting in the middle of the finished surface.
A recessed valve box gives the gas fitter another option.
The valve is still there and accessible, but the installation has a much cleaner appearance.
Designed with installation flexibility in mind
One of the useful features of the Burnaby Recessed Valve Box is that the connection can be made from the top or the back of the box. This can give the installer more flexibility depending on how the gas piping is being routed.
The box also includes a brass union for easier installation and future maintenance.
It’s a relatively simple idea, but these are the kinds of details that can make a difference when you’re working around existing construction or trying to achieve a clean finished installation.
Three sizes are available
The Recessed Valve Box is available in:
- 3/8″
- 1/2″
- 3/4″
Burnaby’s catalogue identifies the models as REC-VAL-38, REC-VAL-50 and REC-VAL-75 respectively.
This gives gas fitters options when working with different gas piping requirements.
A good option for customer-facing installations
For a gas fitter or plumber, not every part of an installation is going to be visible once the job is complete.
But when a shut-off valve is located in an area where the customer will see it every day, the finished appearance can matter.
A recessed valve box can help turn what might otherwise be an exposed valve into a more finished-looking part of the installation.
The lockable stainless steel door also provides a defined enclosure around the valve rather than leaving the valve exposed.
It’s practical, but it also looks intentional.
Think about the valve before the installation starts
If you’re planning a new gas appliance or renovating an existing space, it’s worth thinking about the location of the shut-off valve before the gas piping is installed.
Ask your gas fitter:
Where will the shut-off valve be located?
Will it be easily accessible?
Will it be visible once the installation is finished?
Can the gas connection be routed from the top or back?
Would a recessed installation make sense for this application?
These decisions are much easier to make before the walls, siding, stonework or other finished surfaces are in place.
A small detail that can improve the finished installation
A gas shut-off valve might not be the most exciting part of a project, but it’s an important one.
And when you’re spending money on a finished installation, small details can make a difference.
The Burnaby Manufacturing Recessed Valve Box provides a dedicated, recessed location for a gas shut-off valve, with a stainless steel lockable door, flexible top or rear connection and an included brass union.
It’s designed to keep the valve accessible, protected and out of the way.
Sometimes, the best installations are the ones where everything you need is right there — without making it the first thing you notice.
About Burnaby Manufacturing
Burnaby Manufacturing has been manufacturing gas connection and safety products in Canada since 1992.
Our product line includes gas outlets, recessed gas plugs, quick disconnects, recessed valve boxes and emergency gas shut-off products for residential and commercial applications.
Made in Canada.


Vancouver Web Design